MF1S50 + EM4100
Datasheets MF1S50 + EM4100
Card Specification MF1S50 + EM4100
|


|
|
This hybrid card is a combination of the following two RFID Technologies built into one card.
The NXP MIFARE Classic S50 with 1Kbytes EEPROM read/write memory is compatible with existing MIFARE infrastructure. It operates in accordance with ISO 14443A. The MIFARE S50 works with reading distances of up to 10cm with true anti-collision properties. The MIFARE Classic S50 is the pioneer and most commonly used contactless smart card ICs operating in the 13.56MHz frequency range.
The EM4100 (previously named H4100) IC is a CMOS integrated circuit for use in electronic Read Only RF transponders. It has a 64Bit Unique Serial Number and has been designed to be used in 125kHz transponders. Due to low power consumption of the logic core and an integrated parallel resonance capacitor of 74pF, the EM4100 Read Only IC provides very good reading distances.
|
 |
| Quantity |
Price (USD) |
Offset print (USD) |
|
1,000
2,500
5,000
7,500
10,000
15,000
20,000
over 25,000
|
1.79
1.74
1.70
1.66
1.62
1.59
1.56
Ask for quote
|
0.50
0.20
0.10
0.07
0.05
0.04
0.03
|
|
| Offset Printing |
|
For printed cards just add printing cost to price for white card. CMYK offset printing costs apply for single or double sided cards. No additional Artwork- or Set-up fees.
|
Personalization
|
Price (USD) |
|
Magstripe - LoCo300
Magstripe - HiCo2750
Magstripe - HiCo4000
Serial number (Thermo Print)
Serial number (Laser Engraving)
UID number (Thermo Print)
UID number (Laser Engraving)
Signature panel
Chip encoding (memory chip)
Barcode printing
Photo personalization
Name personalization
|
0.04 per card
0.07 per card
0.09 per card
0.05 per card
0.11 per card
0.07 per card
0.13 per card
0.05 per card
0.07 per card
0.15 per card
0.50 per card
0.15 per card
|
|
| Prices do not include any applicable taxes and are subject to change without notice. |
|